Miller array info: /nfs/chess/aux/cycles/2026-3/id7b2/meisburger/20261028/DHFR/DHFR_4/DHFR_4_280K_2792/all/DEFAULT/scale/AUTOMATIC_DEFAULT_scaled_unmerged.mtz:I,SIGI Observation type: xray.intensity Type of data: double, size=327824 Type of sigmas: double, size=327824 Number of Miller indices: 327824 Anomalous flag: False Unit cell: (34.2674, 45.4456, 98.8794, 90, 90, 90) Space group: P 21 21 21 (No. 19) ========================= Statistics for data merging ========================= ----------Overall statistics---------- Because unmerged intensities were supplied as input, Xtriage has calculated statistics for merging to assess the usefulness and internal consistency of the data (both overall and as a function of resolution). The merged data will be used for all subsequent steps. Although some of the other analyses performed later are partially redundant with these, the statistics displayed here are the most useful for calculating the information content and expectations for resolution. Note that completeness statistics are calculated with Friedel mates (I+ and I-) treated as redundant observations; completeness for anomalous data may be lower than shown here. Resolution: 49.44 - 1.15 Observations: 327695 Unique reflections: 55463 Redundancy: 5.9 Completeness: 99.08% Mean intensity: 55.0 Mean I/sigma(I): 8.1 R-merge: 0.077 R-meas: 0.084 R-pim: 0.033 ----------Multiplicity, completeness, and signal---------- ----------------------------------------------------------------------------------------------------------------- | Statistics for redundancy, completeness, and signal | |---------------------------------------------------------------------------------------------------------------| | 1/d**2 | N(obs) | N(unique) | Redundancy | Completeness | Mean(I) | Mean(I/sigma) | |---------------------------------------------------------------------------------------------------------------| | 2.47 | 37701 | 5896 | 6.39 | 100.00 | 379.4 | 33.3 | | 1.96 | 38034 | 5689 | 6.69 | 100.00 | 84.3 | 18.4 | | 1.72 | 37167 | 5593 | 6.65 | 100.00 | 30.0 | 10.4 | | 1.56 | 36449 | 5582 | 6.53 | 100.00 | 12.2 | 5.9 | | 1.45 | 37979 | 5591 | 6.79 | 100.00 | 6.5 | 3.7 | | 1.36 | 36304 | 5528 | 6.57 | 100.00 | 3.7 | 2.3 | | 1.29 | 34237 | 5534 | 6.19 | 99.95 | 2.6 | 1.6 | | 1.24 | 28273 | 5459 | 5.18 | 99.09 | 1.9 | 1.1 | | 1.19 | 24538 | 5394 | 4.55 | 97.66 | 1.5 | 0.7 | | 1.15 | 17013 | 5197 | 3.27 | 93.98 | 1.2 | 0.5 | ----------------------------------------------------------------------------------------------------------------- ----------Dataset consistency---------- ------------------------------------------------------------------- | Statistics for dataset consistency | |-----------------------------------------------------------------| | 1/d**2 | R-merge | R-meas | R-pim | CC1/2 | CC(anom) | |-----------------------------------------------------------------| | 2.47 | 0.045 | 0.049 | 0.019 | 0.032 | -0.258 | | 1.96 | 0.086 | 0.093 | 0.036 | 0.061 | -0.240 | | 1.72 | 0.138 | 0.150 | 0.058 | 0.106 | -0.169 | | 1.56 | 0.225 | 0.244 | 0.095 | 0.183 | -0.113 | | 1.45 | 0.338 | 0.366 | 0.140 | 0.277 | -0.073 | | 1.36 | 0.485 | 0.527 | 0.204 | 0.406 | -0.042 | | 1.29 | 0.656 | 0.716 | 0.285 | 0.559 | -0.024 | | 1.24 | 0.875 | 0.975 | 0.424 | 0.804 | -0.008 | | 1.19 | 1.142 | 1.294 | 0.598 | 1.023 | -0.039 | | 1.15 | 1.303 | 1.548 | 0.820 | 1.326 | -0.010 | ------------------------------------------------------------------- References: Diederichs K & Karplus PA (1997) Nature Structural Biology 4:269-275 (with erratum in: Nat Struct Biol 1997 Jul;4(7):592) Weiss MS (2001) J Appl Cryst 34:130-135. Dauter, Z. (2006). Acta Cryst. D62, 867-876. Karplus PA & Diederichs K (2012) Science 336:1030-3. References: Diederichs K & Karplus PA (1997) Nature Structural Biology 4:269-275 (with erratum in: Nat Struct Biol 1997 Jul;4(7):592) Weiss MS (2001) J Appl Cryst 34:130-135. Dauter, Z. (2006). Acta Cryst. D62, 867-876. Karplus PA & Diederichs K (2012) Science 336:1030-3. WARNING: calculation of anomalous statistics failed error: No module named 'phenix' ################################################################################ # Basic statistics # ################################################################################ =================== Solvent content and Matthews coefficient ================== Number of residues unknown, assuming 50% solvent content Best guess : 141 residues in the ASU Caution: this estimate is based on the distribution of solvent content across structures in the PDB, but it does not take into account the resolution of the data (which is strongly correlated with solvent content) or the physical properties of the model (such as oligomerization state, et cetera). If you encounter problems with molecular replacement and/or refinement, you may need to consider the possibility that the ASU contents are different than expected. ======================== Data strength and completeness ======================= Overall for this dataset is 8.1 ----------Completeness at I/sigma cutoffs---------- The following table lists the completeness in various resolution ranges, after applying a I/sigI cut. Miller indices for which individual I/sigI values are larger than the value specified in the top row of the table, are retained, while other intensities are discarded. The resulting completeness profiles are an indication of the strength of the data. ---------------------------------------------------------------------------------------- | Completeness and data strength | |--------------------------------------------------------------------------------------| | Res. range | I/sigI>1 | I/sigI>2 | I/sigI>3 | I/sigI>5 | I/sigI>10 | I/sigI>15 | |--------------------------------------------------------------------------------------| | 49.49 - 2.83 | 99.3 | 98.4 | 97.5 | 95.7 | 91.4 | 85.4 | | 2.83 - 2.25 | 98.6 | 96.9 | 95.0 | 91.0 | 79.5 | 67.4 | | 2.25 - 1.96 | 97.6 | 95.1 | 92.6 | 86.5 | 68.0 | 49.9 | | 1.96 - 1.78 | 94.7 | 90.1 | 85.2 | 75.2 | 50.0 | 30.1 | | 1.78 - 1.66 | 91.0 | 83.0 | 74.3 | 59.2 | 28.3 | 11.0 | | 1.66 - 1.56 | 86.7 | 75.8 | 65.7 | 45.8 | 15.4 | 4.2 | | 1.56 - 1.48 | 80.7 | 64.7 | 51.3 | 30.9 | 7.0 | 1.0 | | 1.48 - 1.42 | 73.8 | 53.2 | 39.1 | 20.4 | 2.1 | 0.1 | | 1.42 - 1.36 | 63.1 | 41.2 | 26.0 | 9.6 | 0.8 | 0.1 | | 1.36 - 1.31 | 56.9 | 32.9 | 18.4 | 5.9 | 0.2 | 0.0 | | 1.31 - 1.27 | 47.9 | 22.7 | 10.6 | 2.2 | 2.9 | 0.0 | | 1.27 - 1.24 | 39.2 | 16.6 | 6.1 | 0.7 | 0.0 | 0.0 | | 1.24 - 1.20 | 31.6 | 9.4 | 2.9 | 0.4 | 0.0 | 0.0 | | 1.20 - 1.18 | 25.4 | 5.9 | 1.7 | 0.1 | 0.0 | 0.0 | ---------------------------------------------------------------------------------------- The completeness of data for which I/sig(I)>3.00, exceeds 85 % for resolution ranges lower than 1.78A. The data are cut at this resolution for the potential twin tests and intensity statistics. ----------Low resolution completeness analyses---------- The following table shows the completeness of the data to 5.0 A. Poor low-resolution completeness often leads to map distortions and other difficulties, and is typically caused by problems with the crystal orientation during data collection, overexposure of frames, interference with the beamstop, or omission of reflections by data-processing software. --------------------------------------------------------- | Resolution range | N(obs)/N(possible) | Completeness | --------------------------------------------------------- | 49.4421 - 10.7468 | [92/92] | 1.000 | | 10.7468 - 8.5444 | [81/81] | 1.000 | | 8.5444 - 7.4685 | [79/79] | 1.000 | | 7.4685 - 6.7876 | [77/77] | 1.000 | | 6.7876 - 6.3021 | [78/78] | 1.000 | | 6.3021 - 5.9312 | [81/81] | 1.000 | | 5.9312 - 5.6346 | [68/68] | 1.000 | | 5.6346 - 5.3896 | [84/84] | 1.000 | | 5.3896 - 5.1824 | [63/63] | 1.000 | | 5.1824 - 5.0037 | [78/78] | 1.000 | --------------------------------------------------------- ----------Completeness (log-binning)---------- The table below presents an alternative overview of data completeness, using the entire resolution range but on a logarithmic scale. This is more sensitive to missing low-resolution data (and is complementary to the separate table showing low-resolution completeness only). -------------------------------------------------- | Resolution | Reflections | Completeness | -------------------------------------------------- | 49.4397 - 10.5007 | 101/101 | 100.0% | | 10.4620 - 8.1078 | 99/99 | 100.0% | | 8.0945 - 6.2442 | 218/218 | 100.0% | | 6.2359 - 4.8121 | 455/455 | 100.0% | | 4.8072 - 3.7080 | 974/974 | 100.0% | | 3.7075 - 2.8583 | 2018/2018 | 100.0% | | 2.8582 - 2.2037 | 4418/4418 | 100.0% | | 2.2030 - 1.6984 | 9432/9432 | 100.0% | | 1.6984 - 1.3093 | 20329/20332 | 100.0% | | 1.3092 - 1.1487 | 17419/17931 | 97.1% | -------------------------------------------------- ----------Analysis of resolution limits---------- Your data have been examined to determine the resolution limits of the data along the reciprocal space axes (a*, b*, and c*). These are expected to vary slightly depending on unit cell parameters and overall resolution, but should never be significantly different for complete data. (This is distinct from the amount of anisotropy present in the data, which changes the effective resolution but does not actually exclude reflections.) overall d_min = 1.149 d_min along a* = 1.182 d_min along b* = 1.165 d_min along c* = 1.150 max. difference between axes = 0.032 Resolution limits are within expected tolerances. ================================== Input data ================================= ----------Summary---------- The original dataset contained unmerged intensities; the statistics below are for the merged data. File name: None Data labels: None Space group: P 21 21 21 Unit cell: 34.2674, 45.4456, 98.8794, 90, 90, 90 Data type: xray.intensity Resolution: 49.4397 - 1.14868 Anomalous: False Number of reflections: 55463 Completeness: 99.08% Completeness should be used to determine if there is sufficient data for refinement and/or model-building. A value greater than 90% is generally desired, while a value less than 75% is considered poor. Values in between will provide less than optimal results. ===================== Absolute scaling and Wilson analysis ==================== ----------Maximum likelihood isotropic Wilson scaling---------- ML estimate of overall B value: 13.28 A**2 Estimated -log of scale factor: -2.17 The overall B value ("Wilson B-factor", derived from the Wilson plot) gives an isotropic approximation for the falloff of intensity as a function of resolution. Note that this approximation may be misleading for anisotropic data (where the crystal is poorly ordered along an axis). The Wilson B is strongly correlated with refined atomic B-factors but these may differ by a significant amount, especially if anisotropy is present. ----------Maximum likelihood anisotropic Wilson scaling---------- ML estimate of overall B_cart value: 13.34, 0.00, 0.00 15.34, 0.00 11.65 Equivalent representation as U_cif: 0.17, -0.00, -0.00 0.19, 0.00 0.15 Eigen analyses of B-cart: ------------------------------------------------- | Eigenvector | Value | Vector | ------------------------------------------------- | 1 | 15.342 | ( 0.00, 1.00, 0.00) | | 2 | 13.344 | ( 1.00, -0.00, 0.00) | | 3 | 11.646 | (-0.00, -0.00, 1.00) | ------------------------------------------------- ML estimate of -log of scale factor: -2.17 ----------Anisotropy analyses---------- For the resolution shell spanning between 1.23 - 1.20 Angstrom, the mean I/sigI is equal to 1.18. 4.4 % of these intensities have an I/sigI > 3. When sorting these intensities by their anisotropic correction factor and analysing the I/sigI behavior for this ordered list, we can gauge the presence of 'anisotropy induced noise amplification' in reciprocal space. The quarter of Intensities *least* affected by the anisotropy correction show : 1.24e+00 Fraction of I/sigI > 3 : 5.60e-02 ( Z = 1.31 ) The quarter of Intensities *most* affected by the anisotropy correction show : 9.88e-01 Fraction of I/sigI > 3 : 8.00e-03 ( Z = 3.92 ) Z-scores are computed on the basis of a Bernoulli model assuming independence of weak reflections with respect to anisotropy. ----------Wilson plot---------- The Wilson plot shows the falloff in intensity as a function in resolution; this is used to calculate the overall B-factor ("Wilson B-factor") for the data shown above. The expected plot is calculated based on analysis of macromolecule structures in the PDB, and the distinctive appearance is due to the non-random arrangement of atoms in the crystal. Some variation is natural, but major deviations from the expected plot may indicate pathological data (including ice rings, detector problems, or processing errors). ----------Mean intensity analyses---------- Inspired by: Morris et al. (2004). J. Synch. Rad.11, 56-59. The following resolution shells are worrisome: ----------------------------------------------------------------- | Mean intensity by shell (outliers) | |---------------------------------------------------------------| | d_spacing | z_score | completeness | / | |---------------------------------------------------------------| | 1.690 | 4.71 | 0.98 | 0.769 | ----------------------------------------------------------------- Possible reasons for the presence of the reported unexpected low or elevated mean intensity in a given resolution bin are : - missing overloaded or weak reflections - suboptimal data processing - satellite (ice) crystals - NCS - translational pseudo symmetry (detected elsewhere) - outliers (detected elsewhere) - ice rings (detected elsewhere) - other problems Note that the presence of abnormalities in a certain region of reciprocal space might confuse the data validation algorithm throughout a large region of reciprocal space, even though the data are acceptable in those areas. ----------Possible outliers---------- Inspired by: Read, Acta Cryst. (1999). D55, 1759-1764 Acentric reflections: None Centric reflections: None ----------Ice ring related problems---------- The following statistics were obtained from ice-ring insensitive resolution ranges: mean bin z_score : 1.66 ( rms deviation : 1.13 ) mean bin completeness : 0.94 ( rms deviation : 0.07 ) The following table shows the Wilson plot Z-scores and completeness for observed data in ice-ring sensitive areas. The expected relative intensity is the theoretical intensity of crystalline ice at the given resolution. Large z-scores and high completeness in these resolution ranges might be a reason to re-assess your data processsing if ice rings were present. ------------------------------------------------------------- | d_spacing | Expected rel. I | Data Z-score | Completeness | ------------------------------------------------------------- | 3.897 | 1.000 | 0.00 | 1.00 | | 3.669 | 0.750 | 2.90 | 1.00 | | 3.441 | 0.530 | 0.51 | 1.00 | | 2.671 | 0.170 | 0.20 | 1.00 | | 2.249 | 0.390 | 1.94 | 1.00 | | 2.072 | 0.300 | 0.77 | 0.99 | | 1.948 | 0.040 | 1.09 | 0.98 | | 1.918 | 0.180 | 1.04 | 1.00 | | 1.883 | 0.030 | 0.34 | 0.99 | | 1.721 | 0.020 | 1.23 | 0.99 | ------------------------------------------------------------- Abnormalities in mean intensity or completeness at resolution ranges with a relative ice ring intensity lower than 0.10 will be ignored. No ice ring related problems detected. If ice rings were present, the data does not look worse at ice ring related d_spacings as compared to the rest of the data set. ################################################################################ # Twinning and symmetry analyses # ################################################################################ ============================= Systematic absences ============================= ----------Table of systematic absence rules---------- The following table gives information about systematic absences allowed for the specified intensity point group. For each operator, the reflections are split in three classes: Systematic absence: Reflections that are absent for this operator. Non absence : Reflections of the same type (i.e. (0,0,l)) as above, but they should be present. Other reflections : All other reflections. For each class, the is reported, as well as the number of violations. A violation is a reflection that is absent when it is expected to be present for a particular space group, or present when it is expected to be absent. The criteria are: Systematic absence violation: I/sigI > 3.0 Non absence violation : I/sigI < 3.0 Other relections violation : I/sigI < 3.0 Operators with low associated violations for *both* systematically absent and non absent reflections, are likely to be true screw axis or glide planes. Both the number of violations and their percentages are given. The number of violations within the 'other reflections' class, can be used as a comparison for the number of violations in the non-absent class. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | Operator | # expected systematic absences | (violations) | # expected non absences | (violations) | # other reflections | (violations) | Score | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | 2_0 (a) | 0 | 0.00 (0, 0.0%) | 8 | 17.18 (2, 25.0%) | 15128 | 22.93 (870, 5.8%) | 1.36e+00 | | 2_1 (a) | 0 | 0.00 (0, 0.0%) | 8 | 17.18 (2, 25.0%) | 15128 | 22.93 (870, 5.8%) | 1.36e+00 | | 2_0 (b) | 0 | 0.00 (0, 0.0%) | 10 | 13.30 (2, 20.0%) | 15126 | 22.94 (870, 5.8%) | 9.86e-01 | | 2_1 (b) | 0 | 0.00 (0, 0.0%) | 10 | 13.30 (2, 20.0%) | 15126 | 22.94 (870, 5.8%) | 9.86e-01 | | 2_0 (c) | 0 | 0.00 (0, 0.0%) | 23 | 22.00 (1, 4.3%) | 15113 | 22.93 (871, 5.8%) | 2.15e+00 | | 2_1 (c) | 0 | 0.00 (0, 0.0%) | 23 | 22.00 (1, 4.3%) | 15113 | 22.93 (871, 5.8%) | 2.15e+00 | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ----------Space group identification---------- Analyses of the absences table indicates a number of likely space group candidates, which are listed below. For each space group, the number of systematic absence violations are listed under the '+++' column. The number of non-absence violations (weak reflections) are listed under '---'. The last column is a likelihood based score for the particular space group. Note that enantiomorphic spacegroups will have equal scores. Also, if absences were removed while processing the data, they will be regarded as missing information, rather then as enforcing that absence in the space group choices. ------------------------------------------------------------------------------------ | space group | # absent | _absent | _absent | +++ | --- | score | ------------------------------------------------------------------------------------ | P 2 2 2 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 2 2 21 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 21 2 2 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 2 21 2 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 21 21 2 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 2 21 21 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 21 2 21 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | | P 21 21 21 | 0 | 0.00 | 0.00 | 0 | 5 | 0.000e+00 | ------------------------------------------------------------------------------------ ----------List of individual systematic absences---------- Note: this analysis uses the original input data rather than the filtered data used for twinning detection; therefore, the results shown here may include more reflections than shown above. P 2 2 2: no systematic absences possible P 2 2 21: no absences found P 21 2 2: no absences found P 2 21 2: no absences found P 21 21 2: no absences found P 2 21 21: no absences found P 21 2 21: no absences found P 21 21 21 (input space group): no absences found =============== Diagnostic tests for twinning and pseudosymmetry ============== Using data between 10.00 to 1.78 Angstrom. ----------Patterson analyses---------- Largest Patterson peak with length larger than 15 Angstrom: Frac. coord. : 0.500 0.000 0.031 Distance to origin : 17.414 Height relative to origin : 13.664 % p_value(height) : 4.783e-02 Explanation The p-value, the probability that a peak of the specified height or larger is found in a Patterson function of a macromolecule that does not have any translational pseudo-symmetry, is equal to 4.783e-02. p_values smaller than 0.05 might indicate weak translational pseudo symmetry, or the self vector of a large anomalous scatterer such as Hg, whereas values smaller than 1e-3 are a very strong indication for the presence of translational pseudo symmetry. ----------Wilson ratio and moments---------- Acentric reflections: /^2 :2.034 (untwinned: 2.000; perfect twin 1.500) ^2/ :0.783 (untwinned: 0.785; perfect twin 0.885) <|E^2 - 1|> :0.747 (untwinned: 0.736; perfect twin 0.541) Centric reflections: /^2 :3.016 (untwinned: 3.000; perfect twin 2.000) ^2/ :0.639 (untwinned: 0.637; perfect twin 0.785) <|E^2 - 1|> :0.974 (untwinned: 0.968; perfect twin 0.736) ----------NZ test for twinning and TNCS---------- The NZ test is diagnostic for both twinning and translational NCS. Note however that if both are present, the effects may cancel each other out, therefore the results of the Patterson analysis and L-test also need to be considered. Maximum deviation acentric : 0.005 Maximum deviation centric : 0.010 _acentric : +0.003 _centric : +0.004 ---------------------------------------------------------------------------------------------------------- | NZ test | |--------------------------------------------------------------------------------------------------------| | z | Acentric observed | Acentric untwinned | Centric observed | Centric untwinned | |--------------------------------------------------------------------------------------------------------| | 0 | 0 | 0 | 0 | 0 | | 0.1 | 0.0929766 | 0.0952 | 0.247575 | 0.2481 | | 0.2 | 0.182484 | 0.1813 | 0.355196 | 0.3453 | | 0.3 | 0.264051 | 0.2592 | 0.414781 | 0.4187 | | 0.4 | 0.33413 | 0.3297 | 0.479908 | 0.4738 | | 0.5 | 0.398427 | 0.3935 | 0.52933 | 0.5205 | | 0.6 | 0.454321 | 0.4512 | 0.567667 | 0.5614 | | 0.7 | 0.508442 | 0.5034 | 0.600462 | 0.5972 | | 0.8 | 0.553697 | 0.5507 | 0.636028 | 0.6289 | | 0.9 | 0.598181 | 0.5934 | 0.662818 | 0.6572 | | 1 | 0.634261 | 0.6321 | 0.688222 | 0.6833 | ---------------------------------------------------------------------------------------------------------- ----------L test for acentric data---------- Using difference vectors (dh,dk,dl) of the form: (2hp, 2kp, 2lp) where hp, kp, and lp are random signed integers such that 2 <= |dh| + |dk| + |dl| <= 8 Mean |L| :0.492 (untwinned: 0.500; perfect twin: 0.375) Mean L^2 :0.326 (untwinned: 0.333; perfect twin: 0.200) The distribution of |L| values indicates a twin fraction of 0.00. Note that this estimate is not as reliable as obtained via a Britton plot or H-test if twin laws are available. --------------------------------------------------------------------------------------------------------------------------------- | L test, acentric data | |-------------------------------------------------------------------------------------------------------------------------------| | |l| | Observed | Acentric theory | Acentric theory, perfect twin | |-------------------------------------------------------------------------------------------------------------------------------| | 0 | 0.0101131 | 0 | 0 | | 0.02 | 0.0299715 | 0.02 | 0.029996 | | 0.04 | 0.0518525 | 0.04 | 0.059968 | | 0.06 | 0.0712513 | 0.06 | 0.089892 | | 0.08 | 0.0917532 | 0.08 | 0.119744 | | 0.1 | 0.1106 | 0.1 | 0.1495 | | 0.12 | 0.13147 | 0.12 | 0.179136 | | 0.14 | 0.15234 | 0.14 | 0.208628 | | 0.16 | 0.171922 | 0.16 | 0.237952 | | 0.18 | 0.192332 | 0.18 | 0.267084 | | 0.2 | 0.212007 | 0.2 | 0.296 | | 0.22 | 0.232325 | 0.22 | 0.324676 | | 0.24 | 0.253471 | 0.24 | 0.353088 | | 0.26 | 0.271674 | 0.26 | 0.381212 | | 0.28 | 0.290705 | 0.28 | 0.409024 | | 0.3 | 0.312402 | 0.3 | 0.4365 | | 0.32 | 0.330698 | 0.32 | 0.463616 | | 0.34 | 0.348717 | 0.34 | 0.490348 | | 0.36 | 0.367932 | 0.36 | 0.516672 | | 0.38 | 0.385952 | 0.38 | 0.542564 | | 0.4 | 0.407373 | 0.4 | 0.568 | | 0.42 | 0.427324 | 0.42 | 0.592956 | | 0.44 | 0.446906 | 0.44 | 0.617408 | | 0.46 | 0.46796 | 0.46 | 0.641332 | | 0.48 | 0.487083 | 0.48 | 0.664704 | | 0.5 | 0.506114 | 0.5 | 0.6875 | | 0.52 | 0.52634 | 0.52 | 0.709696 | | 0.54 | 0.546198 | 0.54 | 0.731268 | | 0.56 | 0.566884 | 0.56 | 0.752192 | | 0.58 | 0.587294 | 0.58 | 0.772444 | | 0.6 | 0.605866 | 0.6 | 0.792 | | 0.62 | 0.62646 | 0.62 | 0.810836 | | 0.64 | 0.64595 | 0.64 | 0.828928 | | 0.66 | 0.667463 | 0.66 | 0.846252 | | 0.68 | 0.688149 | 0.68 | 0.862784 | | 0.7 | 0.708467 | 0.7 | 0.8785 | | 0.72 | 0.728326 | 0.72 | 0.893376 | | 0.74 | 0.749104 | 0.74 | 0.907388 | | 0.76 | 0.76648 | 0.76 | 0.920512 | | 0.78 | 0.78689 | 0.78 | 0.932724 | | 0.8 | 0.805921 | 0.8 | 0.944 | | 0.82 | 0.826515 | 0.82 | 0.954316 | | 0.84 | 0.846005 | 0.84 | 0.963648 | | 0.86 | 0.864485 | 0.86 | 0.971972 | | 0.88 | 0.88655 | 0.88 | 0.979264 | | 0.9 | 0.905029 | 0.9 | 0.9855 | | 0.92 | 0.92691 | 0.92 | 0.990656 | | 0.94 | 0.945022 | 0.94 | 0.994708 | | 0.96 | 0.966719 | 0.96 | 0.997632 | | 0.98 | 0.984922 | 0.98 | 0.999404 | --------------------------------------------------------------------------------------------------------------------------------- Reference: J. Padilla & T. O. Yeates. A statistic for local intensity differences: robustness to anisotropy and pseudo-centering and utility for detecting twinning. Acta Crystallogr. D59, 1124-30, 2003. ================================== Twin laws ================================== ----------Twin law identification---------- No twin laws are possible for this crystal lattice. ================== Twinning and intensity statistics summary ================== ----------Final verdict---------- The largest off-origin peak in the Patterson function is 13.66% of the height of the origin peak. No significant pseudotranslation is detected. The results of the L-test indicate that the intensity statistics behave as expected. No twinning is suspected. ----------Statistics independent of twin laws---------- /^2 : 2.034 (untwinned: 2.0, perfect twin: 1.5) ^2/ : 0.783 (untwinned: 0.785, perfect twin: 0.885) <|E^2-1|> : 0.747 (untwinned: 0.736, perfect twin: 0.541) <|L|> : 0.492 (untwinned: 0.500; perfect twin: 0.375) : 0.326 (untwinned: 0.333; perfect twin: 0.200) Multivariate Z score L-test: 1.689 The multivariate Z score is a quality measure of the given spread in intensities. Good to reasonable data are expected to have a Z score lower than 3.5. Large values can indicate twinning, but small values do not necessarily exclude it. Note that the expected values for perfect twinning are for merohedrally twinned structures, and deviations from untwinned will be larger for perfect higher-order twinning. No (pseudo)merohedral twin laws were found.